Vacuum homogenization emulsifying machine

Application

This equipment is mainly used for high viscosity emulsion, in particular cream, ointment, emulsion products manufacturing

Working principle

The materials are heated and mixed in the water pot and the water pot, then it was pump to the emulsion pot by the vacuum pump. In the emulsion pot , there is a scraper which whirls with high speed to shear the materials. Next, the materials flow to the homongenizer and finally realize vacuum suction.

Introduction

Structure
The machine is composed of emulsion pot (which can lift the lid, with flip-type pot body) water pot, the pan, vacuum devices, heating and temperature control system, cooling system, electrical control system, etc.

Features:

The matrerial pot is auotomatic lifting. The materilas are sucked to emulsion pot by pipeline in the water pot and the oil
cooling system is installed, it's easy control, convenient for operation, theat preservation
Small fineness, time saving, high effect in mixing, dispersing,homongenizing, and emulsion.
The parts contact with materials are made of SS 304\SS 316. Both side are miror polished
The homogenizing mixing and paddle mixing can be used independently.
It adapts heating conduct pipe to heat.

	YT-VACUUM HOMONGENIZER	YT-10	YT-30	YT-50	YT-100	YT-150	YT-200	YT-200	YT-300	YT-500
EMULSION POT	DESIGN VOL (L)	10	30	50	100	150	200	200	300	500
	CAPACITY (L)	8	25	40	80	120	120	160	240	400
	SCRAPER POER (KW)	0.18	0.75	0.75	1.1	1.1	1.5	1.5	1.5	2.2
	SCRAPER SPEED (RPM)	10.120
	HOMONGENIZER POER (KW)	0.55	1.5	1.5	2.2	3	4	7.5	11	-
	HOMONGENIZER SPEED	2800
WATER POT	DESIGN VOL (L)	5	20	35	60	90	120	180	300	-
	CAPCITY (L)	4	16	28	50	75	100	150	250	-
	MIXING POWER (KW)	0.018	0.18	0.18	0.55	0.55	0.75	0.75	1.1	-
	MIXING SPEED (RPM)	80	60·1000
OIL POT	DESIGN VOL (L)	5	15	25	40	60	80	120	200	-
	CAPCITY (L)	4	12	20	35	50	65	100	165	-
	MIXING POWER (KW)	0.018	0.37	0.37	0.55	0.55	0.75	0.75	1.1	-
	MIXING SPEED (RPM)	80
VACUUM	MOTOR POWER (KW)	0.12	-	-	-	0.55	2.2	1.1	1.5	1.5
VACUUM	VACUUM (MPA)	-0.09
LIFTING SYSTEM	MOTOR POWER (KW)		-	-	-	0.75	1.1	1.1	2.2	2.2
LIFTING SYSTEM	LIFTING SYSTEM	MANUAL		ELECTRONIC				HYDRAULIC

Notice

It is costomizable. But please kindly send us the specific demand when you make a enquiry. Thanks for your understanding!

Inquiry：（If immediate response needed, please call (86-28-62812181) or send e-mail to kf@yonton.com）

Print |

top

Name
Tel
Content
ValidCode	Refresh